Module: Vips

Extended by:: FFI::Library

Defined in:: lib/vips.rb,
lib/vips/size.rb,
lib/vips/align.rb,
lib/vips/angle.rb,
lib/vips/image.rb,
lib/vips/image.rb,
lib/vips/access.rb,
lib/vips/coding.rb,
lib/vips/extend.rb,
lib/vips/kernel.rb,
lib/vips/object.rb,
lib/vips/region.rb,
lib/vips/source.rb,
lib/vips/target.rb,
lib/vips/angle45.rb,
lib/vips/methods.rb,
lib/vips/version.rb,
lib/vips/direction.rb,
lib/vips/operation.rb,
lib/vips/bandformat.rb,
lib/vips/blend_mode.rb,
lib/vips/connection.rb,
lib/vips/interesting.rb,
lib/vips/interpolate.rb,
lib/vips/mutableimage.rb,
lib/vips/sourcecustom.rb,
lib/vips/targetcustom.rb,
lib/vips/operationmath.rb,
lib/vips/interpretation.rb,
lib/vips/operationmath2.rb,
lib/vips/operationround.rb,
lib/vips/operationboolean.rb,
lib/vips/operationcomplex.rb,
lib/vips/compass_direction.rb,
lib/vips/operationcomplex2.rb,
lib/vips/operationcomplexget.rb,
lib/vips/operationrelational.rb

Overview

This module provides a binding for the libvips image processing library.

Example

require 'vips'

if ARGV.length < 2
    raise "usage: #{$PROGRAM_NAME}: input-file output-file"
end

im = Vips::Image.new_from_file ARGV[0], access: :sequential

im *= [1, 2, 1]

mask = Vips::Image.new_from_array [
        [-1, -1, -1],
        [-1, 16, -1],
        [-1, -1, -1]
       ], 8
im = im.conv mask, precision: :integer

im.write_to_file ARGV[1]

This example loads a file, boosts the green channel (I'm not sure why), sharpens the image, and saves it back to disc again.

Reading this example line by line, we have:

im = Vips::Image.new_from_file ARGV[0], access: :sequential

Image.new_from_file can load any image file supported by vips. In this example, we will be accessing pixels top-to-bottom as we sweep through the image reading and writing, so :sequential access mode is best for us. The default mode is :random: this allows for full random access to image pixels, but is slower and needs more memory. See Access for full details on the various modes available.

You can also load formatted images from memory buffers, create images that wrap C-style memory arrays, or make images from constants. Use Source and Image.new_from_source to load images from any data source, for example URIs.

The next line:

im *= [1, 2, 1]

Multiplying the image by an array constant uses one array element for each image band. This line assumes that the input image has three bands and will double the middle band. For RGB images, that's doubling green.

Next we have:

mask = Vips::Image.new_from_array [
        [-1, -1, -1],
        [-1, 16, -1],
        [-1, -1, -1]
       ], 8
im = im.conv mask, precision: :integer

Image.new_from_array creates an image from an array constant. The 8 at the end sets the scale: the amount to divide the image by after integer convolution.

See the libvips API docs for vips_conv() (the operation invoked by Image#conv) for details on the convolution operator. By default, it computes with a float mask, but :integer is fine for this case, and is much faster.

Finally:

im.write_to_file ARGV[1]

Image#write_to_file writes an image back to the filesystem. It can write any format supported by vips: the file type is set from the filename suffix. You can also write formatted images to memory buffers, or dump image data to a raw memory array.

Use Target and Image#write_to_target to write formatted images to any data sink, for example URIs.

How it works

The binding uses ruby-ffi to open the libvips shared library. When you call a method on the image class, it uses libvips introspection system (based on GObject) to search the library for an operation of that name, transforms the arguments to a form libvips can digest, and runs the operation.

This means ruby-vips always presents the API implemented by the libvips shared library. It should update itself as new features are added.

Automatic wrapping

ruby-vips adds a Image.method_missing handler to Image and uses it to look up vips operations. For example, the libvips operation add, which appears in C as vips_add(), appears in Ruby as Image#add.

The operation's list of required arguments is searched and the first input image is set to the value of self. Operations which do not take an input image, such as Image.black, appear as class methods. The remainder of the arguments you supply in the function call are used to set the other required input arguments. Any trailing keyword arguments are used to set options on the operation.

The result is the required output argument if there is only one result, or an array of values if the operation produces several results. If the operation has optional output objects, they are returned as a final hash.

For example, Image#min, the vips operation that searches an image for the minimum value, has a large number of optional arguments. You can use it to find the minimum value like this:

min_value = image.min

You can ask it to return the position of the minimum with :x and :y.

min_value, opts = min x: true, y: true
x_pos = opts['x']
y_pos = opts['y']

Now x_pos and y_pos will have the coordinates of the minimum value. There's actually a convenience method for this, Image#minpos.

You can also ask for the top n minimum, for example:

min_value, opts = min size: 10, x_array: true, y_array: true
x_pos = opts['x_array']
y_pos = opts['y_array']

Now x_pos and y_pos will be 10-element arrays.

Because operations are member functions and return the result image, you can chain them. For example, you can write:

result_image = image.real.cos

to calculate the cosine of the real part of a complex image. There are also a full set of arithmetic operator overloads, see below.

libvips types are also automatically wrapped. The override looks at the type of argument required by the operation and converts the value you supply, when it can. For example, Image#linear takes a VipsArrayDouble as an argument for the set of constants to use for multiplication. You can supply this value as an integer, a float, or some kind of compound object and it will be converted for you. You can write:

result_image = image.linear 1, 3
result_image = image.linear 12.4, 13.9
result_image = image.linear [1, 2, 3], [4, 5, 6]
result_image = image.linear 1, [4, 5, 6]

And so on. A set of overloads are defined for Image#linear, see below.

It does a couple of more ambitious conversions. It will automatically convert to and from the various vips types, like VipsBlob and VipsArrayImage. For example, you can read the ICC profile out of an image like this:

profile = im.get_value "icc-profile-data"

and profile will be a byte array.

If an operation takes several input images, you can use a constant for all but one of them and the wrapper will expand the constant to an image for you. For example, Image#ifthenelse uses a condition image to pick pixels between a then and an else image:

result_image = condition_image.ifthenelse then_image, else_image

You can use a constant instead of either the then or the else parts and it will be expanded to an image for you. If you use a constant for both then and else, it will be expanded to match the condition image. For example:

result_image = condition_image.ifthenelse [0, 255, 0], [255, 0, 0]

Will make an image where true pixels are green and false pixels are red.

This is useful for Image#bandjoin, the thing to join two or more images up bandwise. You can write:

rgba = rgb.bandjoin 255

to append a constant 255 band to an image, perhaps to add an alpha channel. Of course you can also write:

result_image = image1.bandjoin image2
result_image = image1.bandjoin [image2, image3]
result_image = Vips::Image.bandjoin [image1, image2, image3]
result_image = image1.bandjoin [image2, 255]

and so on.

Logging

Libvips uses g_log() to log warning, debug, info and (some) error messages.

developer.gnome.org/glib/stable/glib-Message-Logging.html

You can disable warnings by defining the VIPS_WARNING environment variable. You can enable info output by defining VIPS_INFO.

Exceptions

The wrapper spots errors from vips operations and raises the Error exception. You can catch it in the usual way.

Automatic YARD documentation

The bulk of these API docs are generated automatically by Yard.generate. It examines libvips and writes a summary of each operation and the arguments and options that that operation expects.

Use the C API # docs for more detail.

Enums

The libvips enums, such as VipsBandFormat appear in ruby-vips as Symbols like :uchar. They are documented as a set of classes for convenience, see BandFormat, for example.

Draw operations

There are two ways of calling the libvips draw operations, like Image#draw_circle and Image#draw_line.

First, you can use them like functions. For example:

y = x.draw_line 255, 0, 0, x.width, x.height

This will make a new image, y, which is a copy of x but with a line drawn across it. x is unchanged.

This is simple, but will be slow if you want to draw many lines, since ruby-vips will make a copy of the whole image each time.

You can use Image#mutate to make a MutableImage. This is an image which is unshared and is only available inside the Image#mutate block. Within this block, you can use ! versions of the draw operations to modify images and avoid the copy. For example:

image = image.mutate do |mutable|
  (0 ... 1).step(0.01) do |i|
    mutable.draw_line! 255, mutable.width * i, 0, 0, mutable.height * (1 - i)
  end
end

Now each Image#draw_line will directly modify the mutable image, saving the copy. This is much faster and needs much less memory.

Metadata read

Use Image#get_fields to get a list of the metadata fields that an image supports. ICC profiles, for example, are in a field called icc-profile-data. Use vipsheader -a something.jpg at the command-line to see all the fields on an image.

Use Image#get_typeof to get the type of a field. Types are integers, with 0 meaning “no such field”. Constants like GObject::GINT_TYPE are useful for testing field types.

You can read image metadata using Image#get. The field value is converted to a Ruby value in the obvious way.

Metadata write

You can also set and remove image metadata fields. Images are immutable, so you must make any changes inside a Image#mutate block. For example:

image = image.mutate do |mutable|
  image.get_fields.each do |field|
    mutable.remove! field unless field == "icc-profile-data"
  end
end

To remove all metadata except the icc profile.

You can use MutableImage#set! to change the value of an existing field, and MutableImage#set_type! to create a new field with a specified type.

Progress

You can attach signal handlers to images to watch computation progress. For example:

image = Vips::Image.black 1, 100000
image.set_progress true

def progress_to_s(name, progress)
  puts "#{name}:"
  puts "    run = #{progress[:run]}"
  puts "    eta = #{progress[:eta]}"
  puts "    tpels = #{progress[:tpels]}"
  puts "    npels = #{progress[:npels]}"
  puts "    percent = #{progress[:percent]}"
end

image.signal_connect :preeval do |progress|
  progress_to_s("preeval", progress)
end

image.signal_connect :eval do |progress|
  progress_to_s("eval", progress)
  image.set_kill(true) if progress[:percent] > 50
end

image.signal_connect :posteval do |progress|
  progress_to_s("posteval", progress)
end

image.avg

The :eval signal will fire for every tile that is processed. You can stop progress with Image#set_kill and processing will end with an exception.

User streams

You can make your own input and output stream objects with SourceCustom and TargetCustom. For example:

file = File.open "some/file", "rb"
source = Vips::SourceCustom.new
source.on_read { |length| file.read length }
image = Vips::Image.new_from_source source, "", access: "sequential"

Overloads

The wrapper defines the usual set of arithmetic, boolean and relational overloads on image. You can mix images, constants and lists of constants (almost) freely. For example, you can write:

result_image = ((image * [1, 2, 3]).abs < 128) | 4

Expansions

Some vips operators take an enum to select an action, for example Image#math can be used to calculate sine of every pixel like this:

result_image = image.math :sin

This is annoying, so the wrapper expands all these enums into separate members named after the enum. So you can write:

result_image = image.sin

Convenience functions

The wrapper defines a few extra useful utility functions: Image#get_value, Image#set_value, Image#bandsplit, Image#maxpos, Image#minpos, Image#median.

Defined Under Namespace

Modules: Yard Classes: Access, Align, Angle, Angle45, Argument, ArgumentClass, ArgumentClassPtr, ArgumentInstance, ArgumentInstancePtr, BandFormat, BlendMode, Coding, CompassDirection, Connection, Direction, Error, Extend, Image, IntStruct, Interesting, Interpolate, Interpretation, Introspect, Kernel, MutableImage, Object, ObjectClass, Operation, OperationBoolean, OperationComplex, OperationComplex2, OperationComplexget, OperationMath, OperationMath2, OperationRelational, OperationRound, Progress, Region, Size, SizeStruct, Source, SourceCustom, Target, TargetCustom

Constant Summary collapse

LOG_DOMAIN =

"VIPS"

LIBRARY_VERSION =

Vips.version_string

MAX_COORD = libvips has this arbitrary number as a sanity-check upper bound on image size. It's sometimes useful to know when calculating scale factors.

10000000

IMAGE_TYPE = some handy gtypes

GObject.g_type_from_name "VipsImage"

ARRAY_INT_TYPE =

GObject.g_type_from_name "VipsArrayInt"

ARRAY_DOUBLE_TYPE =

GObject.g_type_from_name "VipsArrayDouble"

ARRAY_IMAGE_TYPE =

GObject.g_type_from_name "VipsArrayImage"

REFSTR_TYPE =

GObject.g_type_from_name "VipsRefString"

BLOB_TYPE =

GObject.g_type_from_name "VipsBlob"

BAND_FORMAT_TYPE =

Vips.vips_band_format_get_type

INTERPRETATION_TYPE =

Vips.vips_interpretation_get_type

CODING_TYPE =

Vips.vips_coding_get_type

BLEND_MODE_TYPE =

nil

VERSION =

"2.1.3"

Class Method Summary collapse

.at_least_libvips?(x, y) ⇒ Boolean

True if this is at least libvips x.y.
.cache_set_max(size) ⇒ Object

Set the maximum number of operations that libvips should cache.
.cache_set_max_files(size) ⇒ Object

Set the maximum number of files libvips should keep open in the operation cache.
.cache_set_max_mem(size) ⇒ Object

Set the maximum amount of memory that libvips should use for the operation cache.
.concurrency_set(n) ⇒ Object

Set the size of the libvips worker pool.
.get_suffixes ⇒ [String]

Get a list of all supported file suffixes.
.leak_set(leak) ⇒ Object

Turn libvips leak testing on and off.
.set_debug(debug) ⇒ Object

Deprecated compatibility function.
.vector_set(enabled) ⇒ Object

Enable or disable SIMD and the run-time compiler.

Class Method Details

.at_least_libvips?(x, y) ⇒ `Boolean`

True if this is at least libvips x.y

Returns:

(Boolean)

# File 'lib/vips.rb', line 690

def self.at_least_libvips?(x, y)
  major = version(0)
  minor = version(1)

  major > x || (major == x && minor >= y)
end

.cache_set_max(size) ⇒ `Object`

Set the maximum number of operations that libvips should cache. Set 0 to disable the operation cache. The default is 1000.



647
648
649

# File 'lib/vips.rb', line 647

def self.cache_set_max size
  vips_cache_set_max size
end

.cache_set_max_files(size) ⇒ `Object`

Set the maximum number of files libvips should keep open in the operation cache. Set 0 to disable the operation cache. The default is 100.



660
661
662

# File 'lib/vips.rb', line 660

def self.cache_set_max_files size
  vips_cache_set_max_files size
end

.cache_set_max_mem(size) ⇒ `Object`

Set the maximum amount of memory that libvips should use for the operation cache. Set 0 to disable the operation cache. The default is 100mb.



653
654
655

# File 'lib/vips.rb', line 653

def self.cache_set_max_mem size
  vips_cache_set_max_mem size
end

.concurrency_set(n) ⇒ `Object`

Set the size of the libvips worker pool. This defaults to the number of hardware threads on your computer. Set to 1 to disable threading.



666
667
668

# File 'lib/vips.rb', line 666

def self.concurrency_set n
  vips_concurrency_set n
end

.get_suffixes ⇒ `[String]`

Get a list of all supported file suffixes.

Returns:

([String]) —

array of supported suffixes

# File 'lib/vips.rb', line 700

def self.get_suffixes
  # vips_foreign_get_suffixes() was added in libvips 8.8
  return [] unless Vips.respond_to? :vips_foreign_get_suffixes

  array = Vips.vips_foreign_get_suffixes

  names = []
  p = array
  until (q = p.read_pointer).null?
    suff = q.read_string
    GLib.g_free q
    names << suff unless names.include? suff
    p += FFI::Type::POINTER.size
  end
  GLib.g_free array

  names
end

.leak_set(leak) ⇒ `Object`

Turn libvips leak testing on and off. Handy for debugging ruby-vips, not very useful for user code.



637
638
639

# File 'lib/vips.rb', line 637

def self.leak_set leak
  vips_leak_set((leak ? 1 : 0))
end

.set_debug(debug) ⇒ `Object`

Deprecated compatibility function.

Don't use this, instead change GLib::logger.level.

# File 'lib/vips.rb', line 680

def self.set_debug debug
  if debug
    GLib.logger.level = Logger::DEBUG
  end
end

.vector_set(enabled) ⇒ `Object`

Enable or disable SIMD and the run-time compiler. This can give a nice speed-up, but can also be unstable on some systems or with some versions of the run-time compiler.



673
674
675

# File 'lib/vips.rb', line 673

def self.vector_set enabled
  vips_vector_set_enabled(enabled ? 1 : 0)
end